BASIC

Water is always valuable for everybody. Here is the awesome project, WiRoTip for people or city that has problem with potable water supply monitoring. It shows how small ideas and a few skills can make a lot of possibilities today.

This is the Getting Started for IoT Device with Cayenne. Cayenne is now BETA service for IoT Devices. You can use Rasberry Pi, Arduino, ESP8266, LoRa to build your own IoT Device with Cayenne. Now!

There are 17 tutorials to build Arduino Web Server. Makers can learn From the Basic Web Server to the Advanced Web Server.

Have your own Smart Light. Anytime and anywhere control your Smart Light. It consists of simple Tutorial with Arduino Ethernet Shield.

This project guide you that sending the sensor data like temperature, LDR, a Motion sensor(PIR) data etc. to the Ubidots and analyse the data using a graph, trigger the Event like sending the message to the user if anything happens wrong.

We can turn ON and Turn Off the Tv remotely using IR and IoT technology. We can send the IR code it may ON or OFF etc. to the gateway, then gateway sends it to the client device via the server.

The project guide you to make Toy for cats, if you are not able to spend more time with your pets like cat etc . so it will help to play the cat with toys.

This project guide you to how to make smart blutooth fan using HC05 device and wizwiki 7500 board.

An Arduino and Ethernet shield are used as a web server to host a web page that contains a text box. Text can be typed into the web page text box using a web browser and sent to the Arduino by clicking a button on the web page.

Ethernet or Internet communication originally, a protocol has been defined between peer-to-peer and configured to communicate with that protocol.Ethernet shield uses the chip of Wiznet W5500 which solves the TCP/IP Protocols.

The Fan Arm controls the eagle freely and can turn On and Off the FAN. It is Controlled by joystick and the Push button with Wi Fi.The Fan Arm can be controlled wherever we want and where the person is.

This guide is just the tip of the ice berg to build a complete home automation project using Arduino. We will build a Ethernet controlled home automation to control 3 LED’s or switches in your room.

This tutorial explains how to control a LED from PC using Arduino ethernet shield. The Arduino ethernet shield is use WIZnet W5100 ethernet chip.

This tutorial explains about the wiring and testing the different boards of arduino with the Ethernet shield.We will focus on how to wire Arduino UNO R3 to Arduino LAN Ethernet Shield R3 and Arduino MEGA R2 to Arduino LAN Ethernet Shield, then test whether it works or not.

In this Project we will use Arduino and Ethernet shield W5100 to create a simple Web server.Using the Ethernet library, the device will be able to answer a HTTP request with the Ethernet shield. After opening a browser and navigating to the Ethernet shield’s IP address, the Arduino will respond with just enough HTML for a browser to display the data