The sensor data can be sent to the IoT server using Wiz550SR, The WIZ550SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.
This project describes that how to use the serial to ethernet device for different platform. The serial to ethernet is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.
In order to complete this lesson, you will need an Arduino, an Ethernet Shield, and the Pressure Sensor. If you do not have this particular pressure sensor, you can probably follow along in the lesson using whatever sensor you have that is of interest.
Applications, Arduino Ethernet, Automation, Cloud, Ethernet Shield, Gateway, Remote Control, Serial to Ethernet, Serial to Ethernet, W5100, W5100robert
Here’s an example using Arduino to monitor the position of a garage door, and wirelessly report the position to OpenHAB, to be displayed the web interface.
There are a lots of Twitter feed readers around the Web that use Arduino AND a PC to display twits on LCD displays or whatsoever. Then, I decide it was the time to design a solution for performing the same job WITHOUT A PC, and here's the project.
Geeknesia is an Internet Of Things platform, kind of like ThingSpeak but it's from Indonesia. I use Arduino Uno and Ethernet Shield for sending DHT21's data (Humidity and Temperature) from my lab to Geeknesia.