Project Description

Overview :

The Arduino automatically recognizes and reads the measured values cyclically. For each measurement, these values are transmitted via a Web interface to the Web server Telemetry Center. These values are stored and can be accessed via the web interface.

Required :

  • Arduino
  • Temperatursensoren DS18x20 an einem 1-Wire-Bus
  • Ethernet-Shield(w5100)

Configuration :

IF

To use Telemetrie.Center for storage and display of your readings, you need a user account and a token. This is obtained here.

Test Output Information : http://telemetrie.center/messwerte.php?liste&c=Testkanal

Dated : September, 2016

Original : http://www.dl8ma.de/telemetrie-center/arduino-web-telemetrie-client.php

Author : dl8ma[at]amateurfunk.de