Project Description

This project introduce Arduino and smart home project based on Arduino platform / Ethernet Shield

 

Introduction

This project introduce Arduino and smart home project based on Arduino platform / Ethernet Shield. The authors(Jörg and Christoph) are the German people. They posted five steps about detailed their smart home projects.

For more details, Please refer to author’s posting at each steps.

 

Steps

HowTo Teil 1: Das steckt dahinter

1_Sensoren-und-Aktoren-für-Arduino-550x413

  • Introduce about Arduino and components for author’s project
    • Arduino UNO / Ethernet Shield
    • Sensors / LED / Relays
    • Breadboard and Jumper cables

 

HowTo Teil 2: Bewegungsmelder per UDP an Loxone anbinden

2_Arduino-Board-Breadboard-PID-Bewegungsmelder-550x413

 

HowTo Teil 3: Helligkeitssensor per UDP an Loxone anbinden

3_Arduino-Board-Bewegungsmelder-Fotowiderstand-550x413

3_Loxone-Config-Virtueller-UDP-Eingang-Befehl-Helligkeitssensor-550x346

 

HowTo Teil 4: Status-LED per UDP ansteuern

4_Konzept-Onlineverbindungsstatus-550x293 4_Arduino-Board-Bewegungsmelder-Fotowiderstand-LED-550x413

 

HowTo Teil 5: 24 V LED-Spot per Schaltrelais ansteuern

5_Testinstallation-24-V-LED-Lampe-Schaltrelais-Detail-2-550x413

 

 

Hardware schematic and Source code

Refer to author’s posting at each steps (above).

 

 

 

Sources:

http://www.meintechblog.de/2015/06/arduino-im-smart-home-howto-teil-1-das-steckt-dahinter/

http://www.meintechblog.de/2015/06/arduino-im-smart-home-howto-teil-2-bewegungsmelder-per-udp-an-loxone-anbinden/

http://www.meintechblog.de/2015/06/arduino-im-smart-home-howto-teil-3-helligkeitssensor-per-udp-an-loxone-anbinden/

http://www.meintechblog.de/2015/06/arduino-im-smart-home-howto-teil-4-status-led-per-udp-ansteuern/

http://www.meintechblog.de/2015/06/arduino-im-smart-home-howto-teil-5-24-v-led-spot-per-schaltrelais-ansteuern/