Project Description

It’s brand new mbed IoT platform. Arch Link is an mbed enabled development board based on Nordic nRF51822 and WIZnet W5500 ethernet interface Link which is designed by SeeedStudio. This project is a demo which upload the data to dweet.io and view the information in real time.

Arch Link

Arch Link

 

FEATURES

  mbed enabled

  • • ŸOnline IDE
  • • ŸEasy to use C/C++ SDK
  • • ŸHandy libraries

  CMSIS DAP based on LPC11U35

  • • ŸDrag-n-drop programming
  • • ŸDebug using CMSIS DAP standard
  • • ŸUSB virtual serial for communication

  Arduino form factor with Grove connectors

  • • ŸI2C and UART connecter on board

  Nordic nRF51822 Multi-protocol Bluetooth® 4.0 low energy/2.4GHz RF SoC

  • • ŸARM Cortex M0 processor
  • • Ÿ256kB flash/16kB RAM
  • • ŸConfigurable I/O mapping for digital I/O

  WIZnet W5500 Ethernet

  • • ŸSupports following Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  • • ŸSupports Power down mode
  • • ŸSupports Wake on LAN over UDP
  • • ŸSupports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
  • • ŸInternal 32Kbytes Memory for Tx/Rx Buffers
  • • Ÿ10BaseT/100BaseTX Ethernet PHY embedded
  • • Ÿwith RJ45 connector

  USB Micro B connector

  Micro SD Card connector

 

The original site is http://www.seeedstudio.com/recipe/301-an-iot-demo-made-with-arch-link-mbed-platform.html

Shop url is https://www.seeedstudio.com/Arch-Link-p-2511.html