Project Description

Description:

This is Smart Plant with Ethernet and in Arduino.

Ethernet is WIZnet W5500 Ethernet shield. It is very easily possible using the ethernet. Ethernet or internet is originally using TCP/IP Protocol communication. And originally TCP/IP Stack is Software. But, W5500 is solved TCP/IP Protocol 4 Layer. So, It is very easily possible ethernet.

Component List
1. WizArduino 2ea (12V input, 3.3V operation)

2. PM1001, Dust Sensor

3. DHT22, Temperature & Humidity Sensor

4. Rain Sensor

5. Moisture Sensor

6. DWP-385 WATER PUMP (DC Motor)

7. Transistor 2ea (Relay control)

8. Relay 2ea (5V input, maximum 220V)

9. DC FAN motor (12V input)

Step 1: Configuration

The smart plant is All Sensor connection.

make an order  First, I configurations each sensor. hardware (schematic), Software (Arduino IDE). And final configuration of each sensor.

Step 2: Software

This project is using the cloud(Ubidots).

The source code is bellow URL.

http://openstory.tistory.com/55.

Author: 

For more information:

https://www.instructables.com/id/Smart-Plantfarm/