This project guide you that sending the sensor data like temperature, LDR, a Motion sensor(PIR) data etc. to the Ubidots and analyse the data using a graph, trigger the Event like sending the message to the user if anything happens wrong.
Wiring the WIZNET W5100/W5500 as Network Time Protocol Client with Microcontroller
We can turn ON and Turn Off the Tv remotely using IR and IoT technology. We can send the IR code it may ON or OFF etc. to the gateway, then gateway sends it to the client device via the server.
The sensor data can be sent to the IoT server using Wiz550SR, The WIZ550SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.
This tutorial describes that how to send the image to the server through different ways like send the image to a server without storing in SD card and with store the image in the SD card then send to the server via various protocols like FTP and HTTP etc.
Sometimes when I take a bath, the water stops. I checked that the water tank is empty and I have to call the water engineer to fix the water. I wish I could've known the water problem earlier. So now, with Cayenne, I have an idea to make My Water System connected to my mobile device
This project describes both the communication between an Arduino Mega and a UPNP capable router, as well as the serial communication between Gameboy and Arduino.
By popular demand, we have tested the Blynk.cc mobile IoT app, and we confirm it's easy to get to work on the Industruino platform. This article show the communication between the Blynk App and industruino.
the Sonos is a uPnP based system there is no IR or way to traditionally control it. Everything needs to be done via HTTP calls. He’s using an Ethernet Shield to translate the RS232 events to uPnP messages.