In this tutorial, we will design a web page that will retrieve Analog readings from the Arduino's Analog Pins and display them on a bar chart within the web page
The system consists of a low power consumption PC running Windows 7 (Dell OptiPlex FX170), an APC Rack PDU AP7940 to control the well pump, and an Arduino UNO R3 with a 3 wire 15 psi water pressure sensor and a Ethernet Shield.
In order to complete this lesson, you will need an Arduino, an Ethernet Shield, and the Pressure Sensor. If you do not have this particular pressure sensor, you can probably follow along in the lesson using whatever sensor you have that is of interest.
This is Gateway product made by WIZnet customer using WIZ107SR.
Applications, Arduino Ethernet, Automation, Cloud, Ethernet Shield, Gateway, Remote Control, Serial to Ethernet, Serial to Ethernet, W5100, W5100robert
Here’s an example using Arduino to monitor the position of a garage door, and wirelessly report the position to OpenHAB, to be displayed the web interface.
Remote control for home lighting and heating (Домашняя автоматизация с openHAB: освещение и удаленное управление обогревателями)
Applications, Arduino Ethernet, Cloud, Ethernet Shield, Gateway, IoT, Remote Control, Serial to Ethernet, W5100, W5100, Webrobert
All of a sudden, during the discussion about home automation at work, I was struct by an ides that I wanted to heat up my cold room before my arrival at home. I wanted to set up desired temperatures and control remotely at any time.