This posting introduces DIY projects using WIZnet’s Wi-Fi modules WizFi250 and WizFi210.

To Make Canon DSLR’s Remote controller using  WizFi250

This project explains how to make a Wi-Fi Remote Controller that controls a Canon Camera.

You need the following components of the device.

  • Camera
    • Connect the Receiver and 2.5pi Audio Cable
  • Receiver
    • Arduino Uno(MCU)+WizFi250 (Wi-Fi Module)
    • Use AP function of WizFi250 (directly connect to smartphone without wire/wireless router)
  • Remote Controller
    • Smart Phone
    • Simple Android App

Wiznet Museum : http://wiznetmuseum.com/portfolio-items/to-make-canon-dslrs-remote-controller-using-wizfi250/

Author’s Blog(KOR) : http://kaizen8501.tistory.com/86

Author’s Blog(ENG) : http://www.life4iot.com/2015/01/18/to-make-canon-dslrs-remote-controller-using-wizfi250/?lang=en

 

WiFi Electric Skateboard using WIZwiki-W7500ECO + WizFi250

This project explains how to make an electric skateboard using the WIZwiki-W7500ECO MCU board and the WizFi250 Wi-Fi Module.

The required components are as follows.

If you would like to purchase any, please click the name.

 

Wiznet Museum : http://wiznetmuseum.com/portfolio-items/to-make-canon-dslrs-remote-controller-using-wizfi250/

Author’s Blog(KOR) :

– http://kaizen8501.tistory.com/112

– http://kaizen8501.tistory.com/113

– http://kaizen8501.tistory.com/114

Author’s Blog(ENG) :

http://www.life4iot.com/2015/10/29/electric-skateboard-1-material/

– http://www.life4iot.com/2015/10/29/electric-skateboard2-servo-motor-test/

– http://www.life4iot.com/2015/10/29/electric-skateboard3-wi-fi-receiver-and-controller/

 

Hedgehog – Educational Robotics Controller

Hedgehog is a project for those who want to study and research using Robot. This project was posted on KickStarter in 2015, but failed at funding. However, I think this is a good example for learning the operation principle of embedded device and robotics. For reference, Hedgehog used the WizFi210 Wi-Fi Module for Wi-Fi communication.

For more details, please refer to the following links.

Wiznet Museum : http://wiznetmuseum.com/portfolio-items/hedgehog-educational-robotics-controller-2/

KickStarter : https://www.kickstarter.com/projects/priarobotics/hedgehog-educational-robotics-controller

 

Drainage tank of water purifier IoT

This project describes how to implement an idea that people might have thought about at least once when using a water purifier. The author implemented a device that sends e-mail notifications when the water in the drainage tank rises above a certain height after checking whether the drainage tank needs to be emptied. Arduino and WizFi250(Wi-Fi Module) was used in this project.
For more information, please refer to the following link.

Wiznet Museum : http://wiznetmuseum.com/portfolio-items/drainage-tank-of-water-purifier-iot/

 
Curator : Patrick in WIZnet
You can contact to kaizen@wiznet.co.kr